domingo, 30 de julho de 2017

Urban sketchers Londrina #123


Urban sketching, Alameda Jardino, Londrina. Trying out the Saunders Waterford watercolor paper... as good as Arches.

quarta-feira, 26 de julho de 2017

Curitiba - Morretes Part 1

Trip to Curitiba-Morretes took about 20 minutes for sketches. Below Niemeyer museum "museu do olho". (Curitiba)

 Ponte velha sketch, Morretes
Lunch time, Nhundiaquara hotel, Morretes. A sign reads : "Nhundiaquara hotel. The oldest building in town. Preserves some of the walls remnant from the 17th century. At first, acquired in 1944 by the Alpendre's family and transformed in a hotel in the following year.

 Sketch of the bridge, 20-30min.
 Igreja Catolica Matriz, quick sketch, about 20 min. All done on Arches hotpress custom hand sewn sketchbook and derwent watersoluble pencil with some Lukas watercolor.
 About 20 min sketch of Jardim botânico greenhouse.

domingo, 9 de julho de 2017

Urban sketchers Londrina #120 Strassberg

Urban sketch painting of Strassberg "Tortas alemãs"/ german pie. The façada was painted by my father, Sergio Russo quite sometime ago, paint itself is already fading.





quinta-feira, 29 de junho de 2017

Custom made oil plein air pochade.

 A pochade dedicated to oil painting, I've ordered custom-made to support canvas or other support up to 30x40 (or about 38x28 in the interior.
 All tied up with neodymium magnets, with retractable blades pieces glued on to the wood.
 A small coin of neodymium magnet holds two nails...
 That can be placed on the sides so I can hold a bigger canvas if I want to (or a 30x40/slightly larger)  I have not yet tried support larger than 30x40 but I suppose it might be too heavy for this pochade, so I'd likely have to find another solution anyway.
Trimmed hinge to hold shoulder strap...

 Inside the pochade, taped paper palette.
Small piece of wood with holes for the brushes, with two larger pieces of snap off blade...

 ...so I can use mediums and solvents (and blends of both) all held safely with magnets on the bottom glued with epoxy.
The bottom uses a piece of wood with a nut claw 1/20. I've used Titebond III for this wood-wood binding, and super bonder-like glue for all metal-wood binding.

domingo, 18 de junho de 2017

terça-feira, 9 de maio de 2017